Uses of Package
org.metricshub.ipmi.client

Packages that use org.metricshub.ipmi.client
Package
Description
org.metricshub.ipmi.client
The client of a BMC.
  • Classes in org.metricshub.ipmi.client used by org.metricshub.ipmi.client
    Class
    Description
    BmcCapabilities
    What the BMC supports before any login (Get Channel Cipher Suites and Get Channel Authentication Capabilities, IPMI 2.0 sections 22.15 and 22.13): the cipher suites it offers and its authentication options.
    ChassisStatus
    The state of the chassis: power, faults, intrusion, identify LED (Get Chassis Status, IPMI 2.0 table 28-3).
    DeviceFunction
    A function the BMC provides, from the additional device support byte of Get Device ID (IPMI 2.0 table 20-2).
    DeviceId
    The identity of the BMC: its manufacturer and product IDs, its firmware revision, the IPMI version it implements and the functions it provides (Get Device ID, IPMI 2.0 section 20.1).
    Fru
    A Field Replaceable Unit of the system: the board, chassis, product and multirecord areas of its FRU inventory (IPMI Platform Management FRU Information Storage Definition), or the SPD data of a memory module, or the Processor Information ROM of a processor, located by an SDR record.
    FruList
    The FRUs read by IpmiClient.frus(): an unmodifiable list, with the SDR records the repository walk skipped.
    FrusRequest
    Reads the FRU inventories of the BMC: those that the FRU Device Locator records of the SDR repository point at, and the one of the system board.
    IpmiClient
    A client of one BMC over IPMI 2.0 (RMCP+).
    IpmiClient.Builder
    Builds an IpmiClient: the BMC, the credentials and the session settings.
    IpmiClientException
    A failure of an IpmiClient operation.
    PowerEvent
    What caused the last power down or power on of the system (Get Chassis Status, IPMI 2.0 table 28-3).
    RawRequest
    Sends any request, like ipmitool raw: bmc.raw(0x2C, 0x01).data(0xDC, 0x01).execute() is Get DCMI Capabilities Info.
    RawResponse
    The reply to a raw request (IpmiClient.raw(int, int)): its completion code and its data as the BMC sent them, whatever the completion code.
    SelEntry
    One entry of the System Event Log, read by IpmiClient.sel().
    SelEntryList
    The entries read from the System Event Log by SelRequest.execute(), in the order of the log, with what Get SEL Info says of the whole log: how many entries it holds, and when it was last written and erased.
    SelRequest
    Reads the System Event Log: bmc.sel().execute() for every entry, bmc.sel().since(entry).execute() for the entries added after one already read, and bmc.sel().stream() to get each entry as soon as it is read.
    Sensor
    A sensor of the BMC, with its SDR record and its reading.
    SensorList
    The sensors read by IpmiClient.sensors(): an unmodifiable list, with the SDR records the repository walk skipped.
    SensorsRequest
    Reads the sensors of the BMC: the Full and Compact sensor records of the SDR repository, each with its Get Sensor Reading.
    SensorStatus
    The status of a sensor: for a threshold sensor, the worst threshold its reading is at or beyond (IPMI 2.0 table 35-15); for a discrete sensor, whether it answers.
    SkippedRecord
    An SDR record the repository walk could not use: the BMC returned it truncated, or the library cannot decode it.
    SolConsole
    A Serial over LAN console, as streams: what the system writes on its serial port is read from SolConsole.input(), what is written to SolConsole.output() reaches its serial port.
    SolRequest
    Opens a Serial over LAN console (IPMI 2.0 section 15) in the session of the client or, when the BMC serves SOL on another UDP port, in a session the client opens there with the same credentials, cipher suite and privilege.